R3-B™ Acoustic Product - Specifications 

> Application: Control broad frequency reverb and flutter

> Standard Size
1200mm x 600mm x 75mm or 25mm

   ( custom sizes available up to 2000mm x 1000mm )

> Total Weight: 
approx: 
5.7kg (75mm) - 3.2kg (25mm)

> Mounting Method: Easy wire suspension with impaling hole.
 

> Frequency Responsiveness
125Hz-20,000Hz

> Fabric Type: T
extured fabric (100% Jute) or Micro Sued

> Acoustic Data Sheet: View / Download

The Core Material is a lightweight acoustic product manufactured from a molten mixture of natural rock and recycled blast furnace waste products, and bonded with a thermosetting resin. It is specially formulated with water repellent to prevent moisture ingress which may reduce acoustic panel performance.

Exposure to an atmosphere of 50°C and 95% relative humidity for four days, results in moisture absorption of less than 0.2% by volume. If the products become wet, full acoustic efficiency will be restored on drying out.

The International Association for Research into Cancer (IARC) has ruled that this acoustic product is non-carcinogenic, with no potential for causing cancer in humans.

These acoustic products are endorsed by the Allergy Research Foundation of Australia and ideal for allergy and asthma suffers.

back_acoustic panel_perforated
product logo_r3b
ARFA
acoustic products made in australia
  Copyright ©2010 CMF Acoustics. All Rights Reserved.             | About Us | Acoustic Products | Consulting | Acoustic Advice | Buy | Contact Us |     

 Acoustic Products Shipping Australia Wide: Sydney | Adelaide | Brisbane | Hobart | Melbourne | Canberra | Perth | Gold Coast

|